POWERCORE TEC-10 är en förstklassig elektronisk kontrollpanel som ger full kontroll av motorn, inklusive auto start/stop, auto varvtal samt visning av motordata och felkoder. TEC-10 använder J1939 samt analoga sensorer på mekaniska motorer för fel och säkerhetsvarningar/nedstängningar. TEC-10 kan också övervakas automatiskt från distans med Murphy Connect Telematics.

Specifications

Interface

• Display
  • Monochrome HR-TFT
  • 2.7 in./ 68 mm, WQVGA (400 x 240 pixels)
  • Languages: English, Spanish, German, French, Italian
• (3) LEDs: green (mode), yellow (warning) and red (shutdown)
• Operator controls:
  • (11) Raised silicone keypads, tactile feedback
  • (1) Rotary switch, power on/off
  • (1) Push-switch (red), engine stop

Power Supply

• Operating Voltage: 8-32 VDC, reverse battery polarity and load dump protected
• Cranking Power Holdup: 0 VDC up to 50 mS(also good for brownout/blackout instances)
• Current consumption: Power on in stopped state; 117 mA at 12 VDC. Power on in standby mode; 52 mA at 12 VDC.

Inputs (9)

• (5) Digital, configurable (active on High, Low, Open)
• (3) Analog, configurable (4-20 mA, 0-5V, resistive or digital ground)
• (1) Frequency, supporting: Magnetic pickup (30 Hz - 10 kHz, 2.0 VAC-120 VAC) and Engine Alternator (30 Hz - 10 kHz, 4.5 VRMS - 90 VRMS)

Outputs (8)

• (2) Relay, switched +DC, 10A
• (1) Relay, Form C (dry / volt-free), 10A
• (2) Low-side FET (–DC), 1A
• (2) High-side FET (+DC), 1A
• (1) Dedicated Alternator Excitation, +DC, 1A

Communications

• (1) CAN: J1939
• (1) RS485: Modbus RTU

Mating Connectors

• 21 Position, Deutsch HDP26-24-21SE,
• 31 Position, Deutsch HDP26-24-31SE

Physical/Environmental

• Enclosure material: Polycarbonate
• Dimensions (WxHxD): 9.59 x 7.34 x 5.20 in. (243.48 x 186.5 x 132.23mm)
• Weight: 4 lbs (1.8 kg)
• IP rating: IP67
• Operating Temperature: -40° to +85° C (-40° to 185° F)
• Storage Temperature: -40 to +85° C (-40° to 185° F)
• Vibration: 7.86 Grms (5-2000 Hz), 3-axis random
• Shock: ±50G, 3-axis